Rca 10 Tablet Stuck On Logo Screen

Posted on

Rca 10 Tablet Stuck On Logo Screen

1. Make sure that the tablet is actually powered off. · 2. Press the “Power” and the “Volume Up” buttons, together, until you see the start-up logo.
hold down the power button for like 10 seconds till its completely off then press and hold the power and volume up button for four seconds.
In this case, pull out your battery and wait for about 10-15 seconds then put back on your. My rca 7 tablet is stuck at the main screen and it won t go any further. My rca tablet wont load past the white rca logo screen i have tried resetting.
1. First turn off the tablet. · 2. Next press and hold “Power” until you see the manufacturers logo on the screen, then release the power button. · 3.
Hi All, im new to this forum, i received this Android tablet, it looks exactly like this. adb pull build.prop set correct settings example 120 for 7 or 8 inch screen. you need to install the adb driver before you can use it : Colonel Zap’s Blog: Allwinner A10 ADB-Drivers. rca tablet stuck on startup screen.
Mine fails to boot up, can’t get past the RCA logo screen. · Hold the power button & the reset button(with a paperclip) on the side of the usb micro connector for 10.
The RCA logo will then appear on the screen and “dots” circling. This process may take about 30min-1hr (depending on the amount of files/data/configuration/.
rca tablet stuck on logo screen stuck on silver rca logo screen press the. My RCA 10 inch tablet with windows 10 OS will not boot I can get it into THE RC.

Leave a Reply

Your email address will not be published. Required fields are marked *