2009 Nissan Altima Won’t Start Brake Switch

Posted on

2009 Nissan Altima Won't Start Brake Switch

Push Button Start Nissans – Won’t Start? Here’s the … Replacing Nissan’s Brake Switch. Recently, my wife’s 2008 Nissan Altima wouldn’t start.
Still won’t start! Check new battery – fine. Check alternator – fine. Do some reading on here and it looks like the brake switch. Have my wife do a .
Here’s the hack: While in park, press the gas and the brake at the same time as hard as you can (to the floor) then push the start button while holding them down. You may need to lightly start to release the gas but keep your foot on the brake and it starts right up. He said it’s common and from moisture on the engine.
My 2011 Nissan Altima is killing my battery, therefore car won’t start. Third time … If it was the brake pedal switch it would not turn over. It could .
oined May 5, 2009. ·. 634 Posts. #4 • Apr 16, 2010. The ikey uses the brake switch to tell if you’re pressing the brake when trying to start the car. … car (’08 Altima), the brake pedal is really hard to push and the car won’t start.
Hi there: Although it’s possible that a faulty brake switch is the reason why your Altima won’t start, it’s also possible that the starter, starter relay.
Troubleshoothing guide why your car won’t start: car clicks but won’t turn over, … Nissan Rogue 2014-2017 · Volkswagen Tiguan 2009-2017 · Toyota … You get into the car, press the brake, push the button and it starts. … If your brake lights don’t work, the brake light switch and its circuit must be checked.
brake switch problem 4th Generation Altima (2007-2009) … engine won’t start because the ECU needs to know that brake pedal is depressed.

Leave a Reply

Your email address will not be published. Required fields are marked *